You're currently on:
Re-Light Service for a SAVILLE AV PX-2300 Projector Lamp
Northstar AVs innovative Re-Light Projector Lamp Service is not only a significant cost savings but an environmentally responsible approach to AV.
The Re-Light service is a complete breakdown of your existing lamp housing. The housing is first evaluated & cleaned, then all the essential components of the lamp are replaced with brand new OEM (Original Equipment Manufacturer) lamps, fans, counter chips and fuses (if applicable). The lamps then go through a strict quality assessment to ensure the lamps are correctly centered and properly focused. Discover significant cost savings while experiencing the same use for life and performance out of a Re-Light bulb.
We only install the highest quality original OEM Lamps - Philips, Osram/Sylvania & SHP brand lamps inside the OEM housings. We DO NOT sell generic or compatible replacement lamps.
All Re-Light brand lamps are subject to a 3 to 5 day lead time. Expedited service is available upon request.
Note: The purchase of this item is an acknowledgement of the Re-Light service. The lamp must be shipped to Northstar AV at the cost of the customer. A printed copy of the invoice must be included in the box with the lamp. Failure to do so could result in a delay of your lamp being serviced. Northstar AV reserves the right to refuse the service in the event the customers lamp does not meet quality standard to Re-Light. Upon initial inspection, if the lamp does not meet standards, the lamp will be returned and a full refund with be given.
Return Shipping Method: Free Shipping by UPS Ground.
Projector Lamp Model: AV PX-2300
Condition: Re-Light Service
Compatible Projectors Models: PX-2300 LAMP / PX2300 LAMP
Average Lamp Hours: 2000
Wattage: 250
Lamp Type: UHP
Warranty: 90 Day Warranty
How to extend the life of your projector lamp
1. Make sure you use gloves when handling projector lamps. Oils and deposits from your hands that may not be visible can create hot spots that can result in premature lamp failure. Wear clean gloves during installation to avoid this potential complication.
2. When replacing the lamp housing, be sure that the new housing is seated completely. Apply gentle pressure at the base of the unit until the housing is fully secure.
3. Make sure all of the air filters of your projector are clean out or changed regularly, as indicated in the projector's User Manual. An obstruction such as a clogged filter will not allow proper venting of the unit. This can cause the unit to overheat. Overheating is a major cause of premature lamp failure.
4. Do not place anything on top of the projector or in front of the intake or exhaust vents. Doing so will cause the projector to overheat.
5. Do not unplug the projector until the lamp has properly cooled. After the projector has been shutoff, the fan remains on to allow the lamp to cool evenly and completely. Proper cooling also decreases the chance of premature lamp failure.
6. Do not move the projector for at least one hour after the projector has been shut down. If the lamp is still warm, vibration can cause the lamp to stress, crack or explode.
7. Do not turn the projector on and off frequently during presentations. When the projector is switched on, the surge of power causes stress on the lamp. Try to minimize on/off cycles.
8. Many digital projection displays offer "Low Lamp," "Eco-Mode" or "Economy Mode" options. These settings help extend the life of your lamp and save you time and money.
9. Most importantly, MAKE SURE YOU SHUT THEM OFF! Leaving a projector on overnight is a sure way to burn up your lamp.
If you have any questions please feel free to contact us any time. A friendly Northstar AV sales member will be happy to help you. You can email us at sales@northstar-av.com or visit the contact us page on our website.
Original (OEM) Lamps vs Compatible Lamps
1.What is the difference between Original (OEM) & OEM compatible lamps? OEM stands for (Original Equipment Manufacturer). These lamps are the original lamps your projector or television came with. They are specifically designed to work in your unit. However, OEM compatible lamps are copies of these lamps. They are built by other companies to the specifications of the original manufacturer. The compatible lamps can sometimes have less then optimal performance.
2.Who makes projector lamps? Out of all the projector and RPTV manufacturers out there, there are only a few major lamp manufacturers with high enough standards that are used. These companies are Philips, Osram, Phoenix (SHP) and Ushio.
3.Why should I buy an Original lamp? There are many reasons you should purchase an original lamp over a compatible. The 2 most important factors are performance and life-time of the bulb. Many knock off or compatible bulbs aren’t built with the highest quality materials and precision. In some cases the bulbs color can be off or the brightness is severely impaired. Secondly, with an original bulb you can be sure you are getting the full lifespan out of your replacement lamp. With a compatible bulb it is more of a gamble. Also Original (OEM) lamps come with full 90 day warranties.
4.Why we recommend Osram or Philips bulbs? The answer is simple; they are the performance leader in the industry. Their lamps out last and outperform all others. They also come will full replacement warranties.
5.What is a generic lamp and why don’t you sell them? Generic lamps are cheap knock off lamps built with substandard components and precision. This results in a significantly shorter life cycle and subpar performance. Although these lamps are considerably cheaper then original or compatible lamps the pros do not outweigh the cons. We simply will not sell them.
If you have any questions please feel free to contact us any time. A friendly Northstar AV sales member will be happy to help you. You can email us at sales@northstar-av.com or visit the contact us page on our website.